Manuals / Brands / Computer Equipment / Personal Computer / Honeywell / Computer Equipment / Personal Computer

Honeywell 6500 Bottom Panel Features, Dolphin Peripherals/Accessories for the Dolphin, DC Power Jack, I/O Connector

1 90

Download 90 pages, 3.53 Mb

Bottom Panel Features

I/O Connector

DC Power Jack

DC Power Jack

The DC power jack receives external power from the Dolphin power cable that is included in the box with the terminal. When connected to the Dolphin power cable, the terminal is powered and the main battery pack is charging.

I/O Connector

The I/O mechanical connector is designed to work exclusively with Dolphin 6500 peripherals and cables. This connector powers the terminal, charges the main battery, and facilitates communication. This connector supports full speed USB 1.1 communication (up to 12 Mbps) and RS-232 communications with a maximum speed of 115Kbps and seven baud rate settings.

Through this connector, you can communicate with a host workstation via Microsoft ActiveSync; see ActiveSync Communication on page 7-3

The I/O connector supports the following signals:

•DC IN

•Transmitted Data

•Request To Send

•USB Host +5V

•USB Host D+

•USB Host D-

•USB Host Detect

•Clear To Send

•Received Data

•GND

•RS-232 Shutdown

•USB Client D+

•USB Client D-

•USB Client +5V

Note: Signals referenced are for a DTE device.

Dolphin Peripherals/Accessories for the Dolphin 6500

The following items are sold separately and enhance your Dolphin 6500’s capabilities.

3 - 11

Contents

Page Page Disclaimer Trademarks Patents Other Trademarks Page Table of Contents Chapter 1 - Agency Approvals Chapter 2 - Getting Started Chapter 3 - Terminal Hardware Overview Chapter 4 - Using the Keypad Chapter 5 - Using the Image Engine Chapter 6 - Using the Laser Engine Chapter 7 - Communication Chapter 8 - Bluetooth Handler Chapter 9 - Dolphin HomeBase/eBase Device Chapter 10 - Dolphin QuadCharger Device Chapter 11 - Dolphin 6500 Net Base Device Chapter 12 - Dolphin 6500 Slide-OnHandle Chapter 13 - Customer Support Page Agency Approvals Laser Light Label R&TTE Compliance Statement—802.11b/gand/or Bluetooth Laser Safety Label LED Safety Statement CB Scheme FCC RF Radiation Exposure Statement Waste Electrical and Electronic Equipment Information Getting Started Step 1. Install the Main Battery Step 2. Charge the Batteries LED Indicators Step 3. Boot the Terminal Command Bar Icons Icon Meaning 28-key keypad ALPHA Using the Stylus Tap Drag Tap & hold For more information about the touch screen, see Touch Screen Display on page Selecting Programs Start > Programs Pop-UpMenus Using Windows Explorer My Device Terminal Hardware Overview Front Panel Features Scan/Decode LED The LED lights red when you press the Scan trigger in scanning applications The LED lights green when a scanned bar code is successfully decoded The LED lights red while the main battery is charging Screen Backlight - Battery/External Power Removing the Screen Protector Installing Your Screen Protector Page Page Stylus Calibration Recalibrate Back Panel Features Hand Strap Rear Scan Button Finger Saddle Installed Battery Installing Memory Cards Left Side Panel Features Headset Jack Right Side Panel Features Top Panel Features Imager or Laser Aperture Window Bottom Panel Features I/O Connector Dolphin Peripherals/Accessories for the Dolphin Dolphin HomeBase™ Device Dolphin eBase™ Device Dolphin QuadCharger™ Device Li-IonBattery Packs Main Battery Pack Changing the Main Battery Pack Managing Main Battery Power Checking Battery Power Storage Guidelines Guidelines for Battery Pack Use and Disposal Internal Backup Battery Charging Charging Guidelines Soft Reset (Warm Boot) Hard Reset (Cold Boot) Troubleshooting Suspend/Resume 1.Tap Start > Settings > Control Panel > System > Memory tab Tap Move the slider to adjust the memory allocation and tap Care and Cleaning of the Dolphin Terminal Dolphin 6500 Technical Specifications Page 60825-1:1993+A1:1997+A2:2001 Page Using the Keypad Alpha Indicators on the Number Keys Function Key Combinations FUNC Red CTRL Key Combinations CTRL Program Buttons Page Using the Image Engine Depth of Field Symbology Type Symbology Name 1D Symbologies 2D Symbologies Composite Codes Using Demos To Decode a Bar Code Sample Bar Codes Omni-DirectionalScanning Positions Taking an Image High-VisAiming Pattern Uploading Images Page Using the Laser Engine Depth of Field - IS4813 Sample Bar Code Communication Connecting the USB Charging/Communication Cable for the Dolphin Charging Terminal with USB Cable Battery USB charging Communication Type Hardware Requirements for Setup Software Requirements for Communication Setting Up the Host Workstation Setting Up the Dolphin Terminal Communicating with the Dolphin Terminal Synchronizing with the Host Workstation Exploring the Terminal from the Workstation Adding Programs via ActiveSync Connecting the Terminal to a Wireless Network Turn Wireless LAN On Configuring the WLAN Radio Honeywell Secure Wireless (SWC) Client User’s Guide www.honeywellaidc.com Adding Programs from the Internet 2.Select the program version that matches your Dolphin terminal and processor 4.Download the program to the terminal directly from the Internet \Program Files 5.On the terminal, double tap the installer file; e.g., the *.exe file Page Bluetooth Handler Scan Dialog 7.Highlight the Bluetooth printer device and tap the Select button 8.When the COM port selection appears, select COM7 and tap OK Registered Bluetooth Virtual COM ports Setting Up a Connection to a Mobile Phone 1.Determine if your phone is configured and connected to GPRS 2.Activate your mobile phone’s Bluetooth feature 3.Select Start > Settings > Network and Dial-upConnections 4.Double tap on Make New Connections Dolphin HomeBase/eBase Device Communication Battery Charging Power Supply Front Panel Terminal Well Rubber Feet Back Panel USB Port Serial Port Ethernet Port (eBase only) Powering the Dolphin HomeBase Device eBase Clamp-onFerrite Core Installation Inserting a Terminal Charging a Spare Battery Structural Dimensions Weight Material Color Page Dolphin QuadCharger Device Charging Batteries Recommendations for Storing Batteries Troubleshooting Page Dolphin 6500 Net Base Device Unpacking the Net Base Charge Time Convenient Storage Capacity Front Panel Back Panel Bottom Panel Connecting Power to the Net Base To Power a Terminal and Charge its Main Battery Software Requirements Applications on the Dolphin Terminal Displaying the Net Base Terminal Well and Dolphin IP Address Desk Mounting Wall Mounting Wood Stud Installation Securing the Base to the Wall Bracket Page Dolphin 6500 Slide-OnHandle Removing the Hand Strap Installing the Handle/Removing the Handle Page Customer Support How to Extend Your Warranty Page Honeywell Scanning & Mobility