
Datalogic™ Magellan® Aux Port Configuration
Scan the following Plug and Play code to program the scanner for a Datalogic Magellan auxiliary port configuration. This bar code sets the baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
Datalogic Magellan Settings
NCR Bioptic Aux Port Configuration
Scan the following Plug and Play code to program the scanner for an NCR bioptic scanner auxiliary port configuration. The following prefixes are programmed for each symbology:
Symbology | Prefix | Symbology | Prefix |
A | Interleaved 2 of 5 | b | |
E0 | Code 128 | f | |
|
| GS1 DataBar | r |
|
| Omnidirecitonal |
|
FF | GS1 DataBar | r | |
|
| Expanded |
|
F | Codabar | N | |
Code 39 | a | Code 32 | a |
|
| Pharmaceutical |
|
|
| (PARAF) |
|
NCR Bioptic Settings
Wincor Nixdorf Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf terminal. This bar code sets the baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
Wincor Nixdorf Terminal Settings
Wincor Nixdorf Beetle™ Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf Beetle terminal. The following prefixes are programmed for each symbology:
Symbology | Prefix | Symbology | Prefix |
|
|
|
|
Code 128 | K | A | |
Code 93 | L | P | |
Codabar | N | Interleaved 2 of 5 | I |
A0 | Plessey | O | |
C | Straight 2 of 5 IATA | H | |
B | All other bar codes | M |
2 - 6