Honeywell 7580g Single Scan Data Format Change, Single, Format, Scan-Data, Data Format, Data Format, Data Format, Data Format, Single Scan-Primary, Single Scan-DataFormat

Data Format 1

Data Format 2

Data Format 3

Single Scan Data Format Change

You can also switch between data formats for a single scan. The next bar code is scanned using an alternate data format, then reverts to the format you have selected above (either Primary, 1, 2, or 3).

For example, you may have set your device to the data format you saved as Data Format 3. You can switch to Data Format 1 for a single trigger pull by scanning the Single Scan-Data Format 1 bar code below. The next bar code that is scanned

uses Data Format 1, then reverts back to Data Format 3.

Single Scan-Primary

Data Format

Single Scan-Data Format 1

Single Scan-Data Format 2

Single Scan-Data Format 3

5 - 13