Honeywell 7580g Data Format Non-MatchError Tone, Error, Tone On, Non-Match, Non-Match, Data Format, Data Format, Not Required, Error Tone Off, Error Tone Off

Choose one of the following options. Default = Data Formatter On, Not Required, Keep Prefix/Suffix.

*Data Formatter On, Not Required,

Keep Prefix/SuffixData Formatter On,Not Required,Drop Prefix/SuffixData Format Required,

Keep Prefix/Suffix

Data Format Required,

Drop Prefix/Suffix

Data Format Non-Match Error Tone

When a bar code is encountered that doesn’t match your required data format, the scanner normally generates an error tone. However, you may want to continue scanning bar codes without hearing the error tone. If you scan the Data Format Non-Match Error Tone Off bar code, data that doesn’t conform to your data format is not transmitted, and no error tone will sound. If you wish to hear the error tone when a non-matching bar code is found, scan the Data Format Non-Match Error

Tone On bar code. Default = Data Format Non-Match Error Tone On.

*Data Format Non-Match Error Tone OnData Format Non-Match

Error Tone Off

Primary/Alternate Data Formats

You can save up to four data formats, and switch between these formats. Your primary data format is saved under 0. Your other

three formats are saved under 1, 2, and 3. To set your device to use one of these formats, scan one of the bar codes below.

Primary Data Format

5 - 12