![](/images/new-backgrounds/1053120/53120103x1.webp)
Configuring via the Web Server
Configuring the System
2.4.3 Inputs Tab
Three inputs are associated with each of the four doors on a NetAXS™ panel:
•Status – Provides the following door status information:
•Egress – Allows the door to open or close normally without generating an alarm.
•Tamper – Reports abnormal handling of the reader device or wiring.
Click to display the Inputs tab:
Figure 2-15: Configuration > Doors > Inputs Tab
Note that there are four possible Mode configurations. Shown in the screen above is the Normally Closed/Unsupervised Mode. The following screens show the remaining modes:
42www.honeywell.com