Program the cooling schedule, Cooling Program | Honeywell CT3300

g.Press until the weekend schedule is displayed (Fig. 23).

h.Set the Saturday and Sunday WAKE time by pressing

or until the desired time is displayed.

i.Set the Saturday and Sunday WAKE temperature by pressing

or until the desired temperature is displayed (Fig. 24).

j.Press again to display a blank schedule for the SLEEP program period and repeat steps h. through j. to set the program.

Fig. 23

Fig. 24

Step 4. Program the cooling schedule

a.Write in the times and temperatures that you want to program for your cooling schedule.

	Cooling	Program	WAKE	LEAVE	RETURN	SLEEP
	Schedule	period	WAKE	LEAVE	RETURN	SLEEP
	Schedule	period

	Suggested	Time	6:00 AM	8:00 AM	6:00 PM	10:00 PM
	Settings
	Settings	Temp	78°F (25.5°C)	85°F (29.5°C)	78°F (25.5°C)	82°F (28°C)
		Temp	78°F (25.5°C)	85°F (29.5°C)	78°F (25.5°C)	82°F (28°C)

	Weekday	Time
	(Mon–Fri)
	(Mon–Fri)	Temp
		Temp

	Weekend	Time
	(Sat–Sun)
	(Sat–Sun)	Temp
		Temp

69-0654-5

PROGRAMMING 15

Image 15

Honeywell CT3300 warranty Program the cooling schedule, Cooling Program

Contents

Table of Contents Installation and Programming Instructions Installation Verify that you have the right thermostatRecycling thermostat Required tools and supplies Optional tools Prepare for installation Check your progress Remove the old thermostat Install the mounting plate Set the thermostat for your type of heating system Fuel Switch Wire the thermostat terminals Type of system Screws a and B Fuel switchHeating system table Mount the thermostat Install the batteries Wires that are not connected to the old thermostat Special wiring instructionsSix or more wires Three thermostat wires Five wires connected to the old thermostat Programming Faceplate illustration and descriptionsDescriptions Set the current time and day Learn about the programming features Programming tips Program period Description When available Program the heating schedule Heating ProgramSchedule Period Cooling Program Program the cooling schedule Check out the system Verify that your heating system worksVerify that your cooling system works Change the clock for Daylight/Standard Time Set the Fan and System switchesSetting Result Operation Switch Setting Result Replace the batteriesIf you see Batteries are You should Override the program settings Change the temperature temporarilyHold a temperature indefinitely Check the current programmed temperature Cancel a programCheck programs Reset the cumulative usage counter to zero Check how long heat/air conditioning has been runningChange a program permanently Then Frequently asked questions Customer assistance Home and Building Control Limited 1-year warranty