Override the program settings
Note: Make sure the System switch is set to either HEAT or COOL before making any changes to the schedule.
Change the temperature temporarily
Press | or | Fig. 27 |
until the desired temperature is displayed. |
The TEMPORARY indicator is displayed indicating that the change is temporary (Fig. 27).
Note: A temporary change to the temperature lasts for the current program period only. The heating/cooling schedule that you programmed resumes when the next scheduled program period is reached. To cancel the temporary change before the next
scheduled program period, press 
.
Hold a temperature indefinitely
Use the Hold Temp feature when you want to maintain a constant temperature indefinitely, such as when you go on vacation.
| Fig. 28 |
a. Press | . |
“HLd” is displayed (Fig. 28).
b.Press 
or 
until the desired temperature is displayed.
The display shows the SET temperature for a few seconds and then resumes reading the current room temperature.
Note: To cancel the hold, press 
.
OPERATION 19 |
