Attach Stylus Tether and Sleeve
The stylus kit includes the stylus, tether and sleeves. The tether allows the stylus to be mounted to the MX3Plus and the sleeve provides storage for the stylus when not in use.
Determine a convenient location for the stylus sleeve.
Carefully remove the paper backing from the Stylus Clip sticky. Firmly press the sticky side of the clip onto the MX3Plus and hold it in place for 15 seconds. Thread the tether through the end of the stylus and tie the ends firmly to the Stylus Clip so that the ends don’t interfere with placing the stylus in the Stylus Clip. Place the stylus in the Stylus Clip when not in use. An extra or replacement stylus can be ordered from Honeywell.