Honeywell E-EQ-MX3PLUSOGWW Table of Contents, Chapter 1: Introduction, Chapter 2: Set Up A New MX3Plus

Table of Contents

Chapter 1: Introduction	1-1
About This Guide	1-1
End User License Agreement (EULA)	1-1
Laser Warnings and Labels	1-2
Label Location	1-2
Label	1-2
Components	1-3
Front	1-3
Back	1-4
Endcap	1-4
Endcap Options	1-5
Chapter 2: Set Up A New MX3Plus	2-1
Hardware Setup	2-1
Software Setup	2-1
End User License Agreement (EULA)	2-1
Battery	2-2
Connect or Remove the Battery Pack	2-2
Insert/Replace Battery	2-2
Remove Battery	2-3
Hotswap the Main Battery	2-3
Charge or Recharge the Main Battery	2-4
Backlights and Indicators	2-5
Tapping the Touch Screen with a Stylus	2-6
Touch Screen	2-7
Calibrating the Touch Screen	2-7
Adjusting the Display Backlight Timer	2-7
Apply the Touch Screen Protective Film	2-7
Using the Input Panel / Virtual Keyboard	2-8
Set Date and Time Zone	2-9
Grab Time Utility	2-9
Autolaunch Time-Sync	2-9
Synchronize with a Local Time Server	2-9
Set Power Scheme Timers	2-10
Battery Power Scheme	2-10
AC Power Scheme	2-10
Adjust Speaker Volume	2-11
Using the Keypad	2-11
Using the Control Panel	2-11

i