Startup Help

Contact Technical Assistance if you need more help.

Can’t change the date/time or

AppLock is installed and may be running in User Mode on the MX3Plus. AppLock user

adjust the volume.

mode restricts access to the control panels.

 

 

Touch screen is not accepting

See Also: "Calibrating the Touch Screen"when the touch screen needs recalibration,

stylus taps or needs recal-

orPress Ctrl+Esc to force the Start Menu to appear. Use the tab, backtab and arrow keys

ibration.

to move the cursor from element to element.

 

 

 

There may be slight delays while the wireless client connects to the network, authorization

MX3Plus seems to lockup as

for voice-enabled applications complete, Wavelink Avalanche management of the

soon as it is rebooted.

MX3Plus startup completes,and Bluetooth relationships establish or re-establish.

 

When the desktop appears or an application begins, the MX3Plus is ready for use.

 

 

 

New batteries must be fully charged prior to first use. Li-Ion batteries (like all batteries) grad-

New MX3Plus main batteries

ually lose their capacity over time (in a linear fashion) and never just stop working. This is

don't last more than a few hours.

important to remember – the MX3Plus is always ‘on’ even when in the Suspend state and

 

draws battery power at all times.

 

 

Continuous Scan Mode

If Continuous Scan Mode has been enabled (factory default setting is 'Disabled'), the laser (or imager) is always on and decoding.

Caution: Laser beam is emitted continuously. Do not stare into the laser beam.

2-20