Chapter 3: Connecting Cables to the MX3Plus

Connect Cable - USB Host

Note: An endcap with a USB Host port (labeled USB-H) must be available.

USB-H Cable Assembly

1. Connect to MX3Plus serial port

2. Host USB port

1.Seat the cable end connector (connector 1) firmly over the USB-C port on the MX3Plus endcap.

2.Tighten the thumbscrews in a clockwise direction. Do not over tighten.

3.Connector 2 on the cable provides a USB-Host connection.

Connect Cable - USB Client

Note: An endcap with a USB Client port (labeled USB-C) must be available.

USB-C Cable Assembly

1. Connect to MX3Plus serial port

2. Connect to host USB port

1.Seat the cable end connector (connector 1) firmly over the USB-C port on the MX3Plus endcap.

2.Tighten the thumbscrews in a clockwise direction. Do not over tighten.

3.Connector 2 on the cable provides a USB-Client connection.

3-1