F111 (SERIES 1,2,3) IN CEILING MEDIA AIR CLEANER

Space Volume

 

Minimum

(L x W x H) in Cubic

Number of

Number of Air

Feet (Cubic Meter)

Persons Present

Cleaners

35001 to 51000

91 to 120

3

(1050 to 1530)

 

 

 

 

 

51001 to 65000

121 to 180

4

(1530 to 1950)

 

 

 

 

 

65001 to 80000

181 to 240

5

(1950 to 2400)

 

 

 

 

 

80001 to 95000

241 to 300

6

(2400 to 2850)

 

 

 

 

 

WARNING

TO REDUCE THE RISK OF FIRE,ELECTRICAL SHOCK, OR INJURY TO PERSONS,OBSERVE THE FOLLOWING:

1.Installation Work And Electrical Wiring Must Be Done By Qualified Person(s) In Accordance With All Applica- ble Codes And Standard, Including Fire Rated Con- structions.

2.When Cutting Or Drilling Into The Wall Or Ceiling, Do Not Damage Electrical Wiring And Other Hidden Utili- ties.

3.Never Place A Switch Where It Can Be Reached From A Tub Or Shower.

4.Use This Unit Only In The Manner Intended By The Manufacturer. If You have Questions, Contact The Man- ufacturer.

5.Before Servicing Or Cleaning Unit, Switch Power Off At Service Panel And Lock Service Panel To Prevent Power From Being Switched on Accidentally.

6.If This Unit Is To Be Installed Over A Tub Or Shower, It Must Be Marked As appropriate For The Application and be connected to a GFCI (Ground Fault Circuit Inter- rupter) - protected branch circuit.

Choose Location

Choosing the correct location for the air cleaner affects the overall performance of the unit. The bidirectional airflow pattern must flow into the longest reaches of the zone being cleaned. See Fig. 2

NOTE: The F111 Has Not Been Investigated

For Use In Fire Resistance Rated

Construction.

Fig. 2. Correct positioning of the air cleaner

for optimum cleaning.

The air cleaner is designed to be suspended centrally in a space and mounted into or on a ceiling. The cleaning footprint of the air cleaner is rectangular with air patterns that move clean air to the corners of the area while drawing contaminated air up from the center of the area. See Fig. 2.

When multiple air cleaners are installed, the allotted areas to be cleaned should be equal. The air throw in one direction is approximately 55 ft (17m). Air velocity at 90 ft per minute (27m per minute) is considered end of throw.

 

CEILING

CLEANING FOOTPRINT

 

F111

1

(SERIES

11000)

 

2

FLOOR

 

CORRECT

INCORRECT

M12652A

IMPORTANT

Never hang the air cleaner higher than 16 ft (5m) above the floor.

INSTALLATION

WARNING

Explosion Hazard Possible.

Can cause personal injury or equipment damage. Do not install or use the F111 (series 11000) air cleaner where there is any danger of gas, vapor or dust explosion.

IMPORTANT

This air cleaner has not been investigated for use in the ceilings of fire-resistant assemblies.

CAUTION

Electrical Hazard.

Can cause personal injury or equipment damage. Turn off power before installing or servicing the air cleaner.

IMPORTANT

Stand on a stable platform when working with the air cleaner.

When Installing this Product…

1.Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condi- tion.

2.Check the ratings given in the instructions and on the product to make sure the product is suitable for your application.

3.Installer must be a trained, experienced service techni- cian.

4.After installation is complete, check out product opera- tion as provided in these instructions.

Unpack the Air Cleaner

Check that all components are included. The unit consists of:

cabinet and grille/door assembly,

media modules,

literature.

68-0198-2 Revised 5-09

4

Page 4
Image 4
Honeywell F111 Series 3 specifications Installation, Choose Location, When Installing this Product…, Unpack the Air Cleaner

F111 Series 3 specifications

The Honeywell F111 Series 3 is a notable aircraft in the realm of military aviation, primarily designed for ground attack and tactical strike missions. A derivative of the original F-111 Aardvark, the Series 3 variant exemplifies advanced engineering and technological innovations that enhance its combat capabilities.

One of the standout features of the F111 Series 3 is its unique variable-sweep wing design, which provides exceptional versatility in various flight conditions. This design allows the wings to adjust their angle during flight, optimizing performance for both high-speed intercepts and low-level tactical missions. As a result, the F111 can operate effectively at a wide range of speeds and altitudes, giving it a tactical edge over its peers.

Equipped with advanced avionics systems, the F111 Series 3 incorporates cutting-edge navigation and targeting technologies. Its onboard radar and electronic warfare systems enable it to detect and track enemy targets while remaining largely undetected. The aircraft can carry a diverse array of munitions, including precision-guided bombs and air-to-ground missiles, further enhancing its strike capabilities. The ability to deliver payloads with pinpoint accuracy makes it a formidable weapon on the battlefield.

Another key characteristic of the F111 Series 3 is its advanced cockpit design. The aircraft features a tandem two-seat configuration, which allows for seamless communication and coordination between the pilot and weapons systems officer. The cockpit is equipped with modern displays and controls that improve situational awareness and streamline operations.

In terms of durability, the F111 Series 3 is engineered to withstand harsh combat conditions. Its robust airframe is constructed to endure the stresses of high-speed flight and combat maneuvers, ensuring mission success even in challenging environments. Additionally, the aircraft's engines are designed for performance reliability, providing ample thrust while maintaining fuel efficiency.

Overall, the Honeywell F111 Series 3 stands out as a versatile and formidable platform in military aviation. With its advanced features, technologies, and characteristics, it continues to play a significant role in modern air operations, embodying the innovation and capabilities expected from contemporary military aircraft.