Honeywell HCM-315T, HCM-310T Operating Your Humidifier, Model #, Set Humidity HCM-300T

HCM-300T_HCM-310T_OM.qxd 5/22/06 5:56 PM Page 5

OPERATING YOUR HUMIDIFIER

Model #	Output/Fan Speed Control	Set Humidity
HCM-300T
	Step 1		Step 1	Step 2

	Set fan speed to desired		Turn the humidistat knob			Then slowly turn the
	output:		clockwise	to the		humidistat knob counter-
	High (	)	highest setting (		).	clockwise	until the
						humidifier shuts off. The
	Fast Humidifying		Run on high for at least
						desired humidity light will
	Medium ( )		1 hour or until room has
						illuminate.
			reached a comfortable
	Everyday moisture control
			humidity level.			Once set, the humidifier will
	Low (	)
						automatically cycle on and off
	Nighttime or					based on your setting.
	maintenance use
HCM-310T/	Step 1		Step 1
HCM-315T

Press power to start unit	Max: 55% Min: 35%
in high speed.	Use the (+) up or (–) down
	button to set desired
	humidity.
	The unit will operate until the selected humidity is reached
Step 2
	or the unit is turned off. When desired humidity is reached,
	the fan will shut off but LED will remain lit. The fan will turn
	back on when the room humidity drops below the set
	level.
	NOTE: To go back to continuous run mode, turn your
	unit off and on again.
Push (+) Up button or (–)
	NOTE: The UV bulb can be turned off and on using the
Down button to select the
	button.
output level.

5