OPERATING: HCM-750 Series
On/Off | Power |
| Output Controls | |
|
|
|
|
|
|
|
|
|
|
With the power switch in the | Turn the power knob to the |
OFF position, plug the filled | On position. |
humidifier into a polarized 120V |
|
outlet. DO NOT FORCE THE |
|
POLARIZED PLUG INTO THE |
|
OUTLET; It will only fit one way. |
|
DO NOT plug in humidifier with |
|
wet hands to avoid electric shock. |
|
NOTE: DO NOT OPERATE WITH TOP COVER REMOVED. Doing so could result in water spilling from humidifier.
REPLACING YOUR WICKING FILTER
Set your output control to:
High: Maximum Moisture for Larger Rooms
Medium: Moisture Maintenance
Low: Sound Sleep or Small Rooms
It is recommended that you change your wicking filter every
NOTE: Wicking Filter performance will diminish depending on the mineral content of the water and the amount of airborne dust in the environment.
IMPORTANT: CHECK WICKING FILTER REGULARLY.
Any of the following conditions indicate that it is time to replace the Wicking Filter.
•A buildup of impurities and minerals on the Wicking Filter (evidenced by discoloration of the Wicking Filter)
•An appreciable decrease in Humidifier output. Please keep in mind if your relative humidity is high your humidifier will put out less moisture.
•The top surface of the Wicking Filter is not moist to the touch
•The Wicking Filter has large holes or tears
The Wicking Filter should be replaced at least one or two times during the season, depending on usage, mineral content of the water and the environment. We encourage you to only use a Honeywell
4