3.4GETTING OPTIMAL PICTURE
Step 1: Window’s background or “H” character should be displayed on your screen.
Step 2: Adjust the screen to the center of the Display (LCD) by using the top and bottom display controls and the
Step 3: Adjust the screen to the center of the Display (LCD) by using the right and left display controls and the Horizontal size and H=Position Adjust menu.
Step 4: Adjust the phase until the “H” character displays clearly.
H
Step 5: Using the Contrast, Brightness, and Color options, set the color.
Step 6: When finished adjusting, save the settings by pressing the Exit key.
Rev. A | 18 | HMMU000882 |
|
| 04/09/04 |
WARNINGS
•Installation and servicing should be performed only by qualified and experienced personnel.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
SAFEGUARDS
This product is made with consideration of the maximum safety of users. However, in order to prevent all possible accidents and financial lost, the monitor must be installed in the appropriate environment. Read instructions and follow all safeguards.
POWER WARNINGS
1.Insert the power plug completely into the socket and verify that it is inserted well. An unstable connection can cause fire.
2.Do not use a damaged power cable or plug or a loose socket. Doing so may cause electric shock or fire.
3.Do not touch the plug with wet hands. Doing so may cause electric shock or fire.
4.Do not overload the socket by using it for several devices at the same time. Doing so may cause a fire.
ENVIRONMENT/INSTALLATION WARNINGS
1.Do not install the unit in an extremely hot or humid location, or in a place subject to dust or mechanical vibration. Do not install in locations with oil or smoke or inside vehicles. The unit is not designed to be waterproof. Exposure to rain or water may damage the unit. Do not use this unit near water or in an unprotected outdoor installation, or any area which is classified as a wet location.
Rev. A | v | HMMU000882 |
|
| 04/09/04 |
