Honeywell HMLCD19 user manual Display Modes Memory, User Setting Area, Factory Presetting Area

NOTES:

2.6 DISPLAY MODES MEMORY

The microcontroller has memory capacity to store 27 different display modes including timing formats and display settings. This memory capacity is divided into two parts: user setting area and factory presetting area.

User Setting Area

The user can add non-standard modes. If display image is adjusted, the image is saved automatically, then when the microcontroller is turned on it detects and displays the last mode stored in the user setting area. The user setting area maintains the last 10 display modes set by the user in its memory. When the user setting area is full (6 modes are registered), if new non-standard timing is registered, the oldest timing settings will be deleted.

Factory Presetting Area

There are 17 display modes stored in the Factory Presetting Area. The display modes are preset at the factory and include most of the display modes currently available (see Timing Chart). Factory Preset Mode can also be retrieved by selecting the RECALL menu.

Automatic Save

The monitor automatically saves the setting value 20 seconds after adjusting the OSD menu.

Rev. A	4	HMMU000882	Rev. A	9	HMMU000882
		04/09/04			04/09/04