Sirius Satellite Radio DEH-P7800MP operation manual XM tuner, Displaying the Radio ID

Section

09 XM tuner

2Press MULTI-CONTROL to select the de- sired channel select setting.

Press MULTI-CONTROL repeatedly to switch between the following channel select settings: Channel number (channel number select set- ting)—Category (channel category select

setting)

# You can also select the XM channel select set- ting by pressing and holding CLOCK.

Selecting a channel in the channel category

1Select the channel select settings to Category.

Refer to Switching the XM channel select mode on the previous page.

2Push MULTI-CONTROL up or down to select the desired channel category.

3Push MULTI-CONTROL left or right to

select the desired channel in the selected channel category.

Displaying the Radio ID

Channel number select setting

If you select CH : 000, the ID code is displayed.

%Push MULTI-CONTROL left or right to select CH : 000.

Channel category select setting

RADIO ID is provided as a channel category for displaying the ID code.

%Push MULTI-CONTROL up or down to

select RADIO ID from channel category.

# If you select another channel, display of the ID

code is canceled.

# Display of the ID code repeats displaying RADIO ID and the ID code one after the other.

Selecting stations from the preset channel list

The preset channel list lets you see the list of preset stations and select one of them to re- ceive.

1Press LIST to switch to the preset chan- nel list mode during the channel display.

2Use MULTI-CONTROL to select the de- sired station.

Turn to change the station; press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

# If you do not operate the list within about 30 seconds, the preset channel list mode is can- celed automatically.

Notes

!You can also recall stations assigned to preset tuning numbers by pushing MULTI-CONTROL up or down during the channel display.

!You can also recall stations assigned to preset

tuning numbers by pressing one of the preset tuning buttons 1–6 on the remote control.

44 En