Sirius Satellite Radio DEH-P7800MP operation manual Initial Settings Calibrating the RPMs

Section

14 Initial Settings

Calibrating the RPMs

Follow the instructions below to measure the RPM of your vehicle and records them. By doing this, the tachometer of this unit can work properly.

!Tachometer of this unit cannot work if you do not perform the RPM calibration.

!In some vehicles, the tachometer may not work properly even if you performed the RPM calibration.

1Park your vehicle in a safe place and be sure to apply the parking brake.

2Use MULTI-CONTROL to select Calibration.

Calibration appears in the display.

3Keep RPMs of the engine at 4 000 rpm and press MULTI-CONTROL.

To measure the RPM of your vehicle properly, keep RPMs of the engine at 4 000 rpm for a few seconds.

When the RPM calibration is completed,

Completed is displayed.

# Some vehicles have a rev limiter that kicks in early (e.g., 3 000 rpm) while parking. In this case,

perform RPM measurement at 2 000 rpm.

# To switch between 4000 rpm and 2000 rpm, push MULTI-CONTROL left or right.

68 En