comes out (repeat this operation as many times as necessary) and then set the knob to the off position
Meanwhile the water temperature
indicator | lights | up | |
indicates | the | water | heating |
process in the boiler. When the light goes out it means that the machine has reached the right temperature and is ready for coffee.
RESET OF STANDARD VALUES
The coffee machine leaves the factory set for the ideal Italian espresso coffee, as approved by the coffee University of Naples and in accordance with ILLY standard. The setting values for long coffee, on the contrary, are in accordance with German standards.
If you wish to reset these standard values, just turn the machine on by pushing the ON/OFF button
REGULATION OF THE GROUND
COFFEE
The coffee machine leaves the factory already set on an ideal coffee grinding level.
Push the cabinet locking button (E/1).
Take the coffee machine out of the housing using the special telescopic runners (E/2).
The grinding level can be changed using the special regulation knob
Push the coffee machine back into the housing (F/1), using the special telescopic runners.
Push the cabinet locking button (F/2) again so that the machine is secure.
PROGRAMMING OF THE GROUND
COFFEE MEASURE
The coffee machine leaves the factory already set to dispense the ideal measure for 1 cup of espresso.
The ground coffee measure can be increased or reduced and once selected, the machine can be programmed to remember this measure. The ground measure that can be programmed only refers to one single cup of coffee. Grinding time for double coffee comes out automatically after having memorised a single coffee.
Set the coffee measuring knob (B- 19) on the “small cup” light on the left
13
