with the appliance’s functions and with the recommendations given.
CE This appliance is in accordance with the directive BT 73/23
Electricity safety norms EN 60335- 1 (August 1995 - Safety for electrical household appliances and similar – General Norm) and EN
Directive EMC 89/336 in conformity with the following
norms:
-
-
-
-
4.INSTRUCTIONS FOR THE FIRST USE
FILL UP THE WATER RESERVOIR
Push the cabinet locking button (E/1).
Take the coffee machine out of the housing using the special telescopic runners (E/2).
Fill up the water reservoir (G) situated on the left side of the appliance with 2,5 litres of water.
Push the coffee machine back into the housing (F/1) and push the locking button (F/2).
The hardness of the water:
-Before filling up the water reservoir, make sure that the Brita filter
12
After that, insert the filter into the reservoir (see chapter 12. Installation “Water Connection”).
-If the machine will not be used for long periods, change the water in the reservoir and empty the boiler by making the machine dispense about half a litre of water (see chapter 8. Hot water).
FILL UP THE COFFEE BEANS
CONTAINER
Push the cabinet locking button (E/1).
Take the coffee machine out of the cabinet using the special telescopic runners (E/2).
Put into the coffee container, situated on the right side of the appliance, about 200 gr. of coffee beans (H).
Push again the coffee machine into its relative seat as before (F/1) using the special runners.
Push the locking button again (F/2) so that the machine will be secured in the housing.
STARTING PROCESS
Switch the coffee machine on by pushing the ON button
Set the machine to dispense hot water (see paragraph 7. Hot water) and wait until the air contained in the boiler has completely passed through the steam pipe
