Electrolux PE 8036-M installation instructions Use Of Coffee Pods E.S.E System

PES 8036-m. The drawer has a lot of useful compartments:

-One large compartment for cups and saucers

-A basin for coffee-grounds

-A compartment for all accessories (filters, measure).

-A tray

7. COFFEE

USE OF COFFEE

￿￿Set the coffee knob (B-19) to the required coffee measure.

￿￿Insert the filter-holder (A-11) under the Coffee measuring device (A-5). By pressing the relative button (A-4), the previously programmed coffee measure for one or two cups will automatically come out. Once the required measure has been dispensed, press the ground coffee with the pressing tool (A-

3).

￿￿Insert the filter-holder (A-11) correctly into the ring nut (A-5) making sure that it is perfectly secure: turn the filter-holder handle from left to right.

￿￿Put one/two coffee cup/s under the filter-holder nozzle (A-15/16).

￿￿Check that the red light of the water temperature indicator (B-

26)is out or wait until it goes out.

￿￿Push the coffee button (B-21) and the coffee measure dispensed will be exactly the same as the one selected and programmed.

￿￿Take the filter-holder out of the ring nut and remove the ground coffee.

USE OF COFFEE PODS

(E.S.E SYSTEM)

￿￿E.S.E. system means Easy Serving Espresso and corresponds to the international standard for brewing coffee using coffee pods (one throwaway portion of roasted coffee) and a suitable coffee machine. The E.S.E. system is easy, practical and ecological because it doesn’t need particular servicing and it is environmentally friendly. Moreover it is also a hygienic way to drink coffee thanks to its special packaging that avoids coffee coming out and it can be easily removed after use.

￿￿The machine can work also with pods: one throwaway portion of roasted coffee (for one single coffee only).

￿￿Turn the knob (B-19) to the required coffee measure (long or short single coffee) and the corresponding light will illuminate.

￿￿Insert the one throwaway pod into the filter-holder (use the 1- cup-filter)

￿￿Insert the filter-holder (A-11) correctly into the ring nut (A-5) making sure that it is perfectly secure: turn the filter-holder handle from left to right.

￿￿Put the cup under the 1-way nozzle (A-15).

￿￿Check that the red light of the water temperature indicator (B-

26)is out or wait until it goes out.

￿￿Push the coffee button (B-21) and the coffee will be dispensed.

￿￿Take the filter-holder out of the ring nut and remove the pod.

15