INSTALLATION WITH SUPPORT

￿￿Put the suitable plates (P/1,P/2) on both sides of the cabinet sides, fixing them with the double- sticker strips (R/1)

Pay attention to the position of the bevel which indicates the right position of the plates.

￿￿Release the telescopic runners and extract the front section (R/2)

￿￿Fix the telescopic runners’ bearings with the screws as shown in picture (R/3)

￿￿Put the lock bracket in the correct position and fix it with two self- threading screws onto the base as shown in picture R/4,R/5.

￿￿Install the telescopic runners on the both sides of the machine as shown in picture R/6

￿￿Insert the machine: the telescopic runners should be coupled with the runners ‘ bearings which are already fitted on the sides. (R/7).

￿￿Ensure the safety lock operates when the runners are pushed in.

￿￿With the machine completely inserted in the housing use the cabinet locking button (A-6) and check that it functions correctly.

￿￿Adjust the cabinet locking bracket, if necessary and secure as shown in picture R/8

￿￿Push the cabinet locking button so that the machine will be correctly fastened (F/2).

WATER CONNECTION

￿￿Push the cabinet locking button (E/1) .

￿￿Take the coffee machine out of the cabinet using the special telescopic runners (E/2)

￿￿Remove the lid of the water reservoir (A-9), and take the Brita filter out (A-17)

￿￿Remove its packaging and soak the filter in cool water for half an hour; then, insert it into the reservoir (S/1)

￿￿Insert the flexible suction water pipe (the one with the filter) and the ventilation pipe in the special grooves (S/2). Push the pipes into the reservoir end-plate (S/3)

￿￿Fill up the reservoir with cool water

￿￿Attention: Only fill the reservoir

with cool drinking water: under no circumstances put milk or other liquids!

￿￿Brita filters can be purchased from our Service Centres, retailers of electric household appliances or retailers of this type of spare parts.

13. WHAT TO DO IF….

If your machine does not function, please ensure that the fault is not caused by:

1.A power failure

2.The water reservoir being empty.

If you require a replacement power cable or if your machine requires servicing, please contact your local Service Force Centre.

21

Page 21
Image 21
Electrolux PE 8036-M installation instructions What to do IF…, Installation with Support, Water Connection