Fig5-8. Nightshot Mode, Fig5-9. BLC/BMB Mode

③RED GAIN (Range is different on each Mode.)

:Adjust RED Gain, and tune the sensitivity of white point.

MANUAL

0 → 1 → …. → 254 → 255

④BLUE GAIN (Range is different on each Mode.)

: Adjust BLUE Gain, and tune the sensitivity of white point.

MANUAL

0 → 1 → …. → 254 → 255

<<SETUP MENU >> LENS MODE

AE MODE WB MODE NIGHTSHOT MODE BLC/WDR MODE PZM SETTING CAMERA ID SETTING SPECIAL FUNCTION FACTORY DEFAULT

5.8NIGHTSHOT MODE

①NIGHTSHOT MODE

:It is used in low illumination condition. ON is Night mode, OFF is normal state. Sensitivity of camera becomes more higher level like BW camera.

It can be available external IR illuminator. In case of AUTO mode is converted ON / OFF automatically according to illuminance change.

MODE	OFF → AUTO → ON → ….

②NIGHTSHOT MODE DETECT TIME

:Set time to protect susceptible conversion of ON/OFF according to illuminance change on Auto. When illuminace keeps the state during

detect time, convert ON/OFF.

DETECT TIME

1 sec. → 2 sec. → …. → 10 sec.

③NIGHTSHOT DETECT MODE

:It is good to use with external IR illuminator on Auto. Select CDS

sensor ON/OFF to detect the illuminance state more effectively.

DETECT MODE

BRT → CDS → BRT+CDS → ….

☞caution

BRT means shooting scene brightness, CDS sensor’s operation depends on circumstantial brightness. Select to match with installation circumstance.

④Turnover LEVEL from DAY TO NIGHT

:Set the LEVEL to turnover from Day to Night.

D→N LEVEL

0.1 lx → 1 lx → 10 lx → ….

⑤Turnover LEVEL from NIGHT TO DAY

: Set the LEVEL to turnover from Night to Day.

N→D LEVEL

10 lx → 100 lx → 1000 lx → ….

⑥Color on Nightshot Mode

:Set Color Mode on Night Mode.

NIGHT COLOR

B/W → COLOR → ….

<<NIGHTSHOT MODE >>

MODEAUTO

DETECT TIME	5sec
DETECT MODE	BRT
D->N LEVEL	1lx
N->D LEVEL	100lx
NIGHT COLOR	B/W
RETURN