⑤Freeze Mode
:It pause current image. ON is to stop, OFF is to return to normal
state.
FREEZE
☞caution
1.Freeze image does not save when you reset the system. This system doesn’t have its’ own memory.
⑥BAUD RATE
:Use to communicate through RS232C, RS485, RS232TTL .
BAUDRATE | 4800bps → 9600bps → …. |
| → 312kbps |
☞caution
1.If the Baud Rate does not match between Camera and external system, it may occur the communication failure. Please make sure a proper Baud Rate.
⑦PROTOCOL Setting
:Setting the PROTOCOL with communication device.
PROTOCOL | DEFAULT → VCL → KD6 → P/D → …. |
⑧Function OSD Display
OSD DISP | ALL → NONE → TOP → |
| BOTTOM → .... |
ALL : Whole Function OSD display
( Focus Mode, Key state, Zoom Ratio, ID )
TOP : Only Upper OSD display ( Focus Mode, key state )
BOTTOM : Only Lower OSD display ( Zoom Ratio, ID )
NONE : All the OSD will not display except MENU OSD.
☞Caution
1.The display of ID and TITLE can be only set in CAMERA ID SETTING.
5.13Initial Set
:Set the INITIAL SET Mode ON so that all changed data are returned to shipping condition. For Initialization, select “YES?” by using NEAR, FAR key and push MENU key. Select “NO?” and push MENU, no initialization and return to Main Menu.
☞caution
1.Make sure when Initialization set as “YES?” , all changed data are return to shipping condition.
2.Some menu as ID,TITLE, etc are not initialized.
- 20 -
