Quick Guide To System Functions
FUNCTION
Check Zones
Display All Descriptors
Arm System
Disarm System
Bypass Zones
Chime Mode
Test Mode
View Messages
View User Capabilities
GOTO Partition
Add a User
Change a User’s Code
Delete a User
Access Control
Control Output Device
PROCEDURE
Press [✱].
Press and hold [✱] for 5 seconds.
Enter code.
Press arming key desired (AWAY,
STAY, INSTANT, MAXIMUM).
Enter code. Press OFF [1].
Enter code. Press BYPASS [6]. Enter
Enter code. Press CHIME [9].
Enter code. Press TEST [5]
Press and hold [0] for 5 seconds
Enter user’s code. Press [✱] + [✱].
Enter security code. Press [✱]. Enter partition number
Press and hold any function key for at least 5 seconds.
Enter master/manager code. Press CODE [8].
Enter new user’s user number. Enter code for that user.
Enter authority for that user in this partition
Follow prompts, 1=Yes, 0=No.
Enter master/manager code. Press CODE [8].
Enter user’s
Enter master/manager code. Press CODE [8].
Enter user no. to be deleted. Enter master/manager code. Press 1 (Yes) at prompt.
Enter security code. Enter 0.
Enter security code. Press [#] Enter 71 or 72.
Enter security code. Press [#] Enter 70.
COMMENTS
To view faulted zones when is system not ready
Displays all alpha descriptors programmed by installer.
Arms system in mode selected.
Disarms system and silences alarms.
Bypassed zones are unprotected and will not cause an alarm if violated.
Keypad will sound if doors or windows are violated while system disarmed.
Activates alarm sounder and allows sensors to be tested.
Message from central station will appear.
Displays partitions & authority levels assigned to the user.
Allows a user at one keypad to perform functions in another partition, (user must be authorized).
Will display abbreviated instructions for the key pressed.
Master & Manager level users can add users to the system, each with its own code and authority level.
Master & Manager level users can change their own or other users’ codes.
Master & Manager level users can delete users. A user can only be deleted by a user with higher
authority level.
Activate access relay for current partition.
Activate output device as programmed.
Activate output device manually