Security Codes & Authority Levels (cont’d)
PART.2 - SHOP? 0 = NO , 1 = YES
PART. 1 A0* WHSE USER 03 AUTH=3G.
The keypad now prompts for the user’s access to the next partition (see GOTO command). Again press 0 or 1. If yes, the system will automatically assign a user number for use in that partition and will prompt for authority level and global arm options for this user within the partition (see previous steps).
When both partitions have been displayed, the keypad will scroll through the partition(s) to which access has been assigned, and will display the user number, authority level and global arm option for each. The “G” after the authority level indicates that the global arm feature is active for this user in the displayed partition. The "*" indicates the partition from which this user can be changed or deleted. The "." at the end of the second line indicates that this user sends open/close reports. Open/close reporting is automatically active for any users added by you, if you have open/close reporting active.
To Change a User’s Code
CODE
1.Enter Master or Manager code and press the be changed.
2.Enter the new code for that user.
8
key + user number to
ADD NEW USER? 0 = NO , 1 = YES
USER 02 CHANGED SUCCESSFULLY
The system will recognize that the user number is already in use and will prompt whether or not this is a new user. Enter 0 to change the existing user's code to the code entered in step 3.
The system will confirm that the change is allowed based on authorization level, and if so, will put the new code into effect.
Note that if changing one’s own code, the system will prompt for the new code to be re- entered. This prevents accidentally changing one’s own code.
