Honeywell N7003V3 manual Security Codes & Authority Levels cont’d, Level 1 Master, Level 2 Manager

Security Codes & Authority Levels (cont’d)

Authority Levels

Authority levels define the system functions a particular user can perform. Depending on the authority assigned to you, there are certain system functions you may be prohibited from performing. In summary, there are six authority levels, each having certain system restrictions as shown below.

Level 1 Master:	Can perform all system functions in assigned
	partitions, and can add, delete or change Manager
	and Operator level users. Master codes are added
	by the Installer.
Level 2 Manager:	Can perform system functions in assigned
	partitions, and can add, delete or change Operator
	level users.
Level 3 Operator A:	Can perform system functions in assigned
	partitions, but cannot add or delete other users.
Level 4 Operator B:	Same as Operator A, except Operator B cannot
	bypass zones of protection.
Level 5 Operator C:	Can arm the system in assigned partitions, but
	cannot disarm the system unless the system was
	armed with this code. This code is typically
	assigned to someone who has a need to
	arm/disarm the system only at certain times (such
	as a baby-sitter).
Level 6 Duress:	Can arm and disarm the system, but also sends a
	silent panic alarm to the central station, if that
	service is connected.

To view your authority level and system capabilities:

1.Enter your code + [✳] + [✳].

2.The keypad will display the partition(s) that you are authorized to operate, and your user number and authority level in each partition.

– 15 –