Honeywell Switches manual Set Points from 0.5 to 150 psi, Standard Specifications

Set Points from 0.5 to 150 psi

5000 Series Extended Duty Pressure Switch With Direct Action Blade Contacts

The 5000 Series switch is specifically	Standard Specifications
designed to stand up to extended duty
applications. This switch is factory set	Type:	Direct action
but capable of field adjustment. It
		blade contact
features a Kapton diaphragm for
	Contacts:	Silver alloy,
compatibility with a wide variety of
		gold plated
fluids, and various terminations
	Set Point:	Factory set
including a Metri-Pack connector that
		from 0.5 to 150 PSI
forms a tight seal when connected.
	Operating Pressure:
Among the outstanding design benefits
	150 PSI for 0.5-24 PSI set point range,
are its durable construction, compact	250 PSI for 25-150 PSI set point range

size, and enhanced set point integrity. Proof Pressure: 500 PSI

Burst Pressure: 750 PSI for 0.5-24 PSI set point range

1250 PSI for 25-150 PSI set point range.

Switch Boot P/N 79380 for Vacuum and Pressure

2.3” REF.

1.47” REF.

Ratings:
Resistive:	15	AMP-	6	VDC
	8	AMP-	12	VDC
	4	AMP-	24	VDC
Inductive:	1	AMP-	120	VAC	2.9” REF.
	0.5	AMP-	240	VAC

Diaphragm: Polyimide film

Temperature

Range: -40° F to + 250° F

Connector: 1/8 -27 NPT male thread

Terminals: #8-32 screws, 1/4” blade,

280 Series Metri-Pack

Circuitry: SPST-N.O., N.C.,

1 circuit adjustable dual circuit, or 2 circuits

adjustable dual circuit. 1.47” REF.

Also available are

5000 Series Switch

with Screw Terminals

NOTE: OPERATING MEDIA (PRESSURE SWITCH) The pressure switch is designed to operate with air, motor oils, transmission oils, jet fuels and other similar hydrocarbon media.

	N.O./N.O. dual circuit
	and N.C./N.C. dual circuit.
Base:	Plated Steel
Cover:	Glass reinforced polyester
Options:	Brass, plastic or stainless
	steel base; various base
	connector thread sizes;
	wire leads (potted & sealed).

5000 Series Switch

with Metri-Pack Terminal

4