Honeywell Switches manual Set Points from 200 to 1000 psi, With Standard Terminal, Piston Switch

Set Points from 200 to 1000 psi

5000 Series Extended Duty Piston Switches With Direct Action Blade Contacts

2.45” REF.

1.47” REF.

3.05” REF.

1.47” REF.

The 5000 Series piston switch is specifically designed for extended duty applications with set point requirements from 200 to 1000 PSI. This switch is factory set with various terminations available including a Metri-Pack connector that forms a tight seal when connected. Among the outstanding design benefits are its durable construction, compact size, and enhanced set point integrity. This switch has a wide media compatibility making it ideal for a number of applications.

Standard Specifications

Type:	Direct action blade
	contact
Contacts:	Silver alloy, gold plated
Set Point:	Factory set
Pressure:	200-1000 PSI
Operating
Pressure:	1000 PSI
Proof Pressure:	2000 PSI

5000 Series Piston Switch				5000 Series Piston Switch
with Screw Terminals				with Metri-Pack Terminal
Piston Switch						Dual Circuit *
with Standard Terminal			Single Circuit
						one circuit adjustable
Contact Setting	Approximate	Circuitry	Part Number			Part Number
Range	Differential
			Screw		Blade	Screw	Blade
200-400	30-100	N.O.	79700		79701	79712	79713
±30		N.C.	79702		79703
401-800	40-125	N.O.	79704		79705	79714	79715
±60		N.C.	79706		79707
801-1000	50-180	N.O.	79708		79709	79716	79717
±90		N.C.	79710		79711
Piston Switch				Single Circuit		Dual Circuit *
with Metri-Pack Terminal			(Mates with Packard			one circuit adjustable
			P/N 15300027)			(Mates with Packard
Contact Setting	Approximate	Circuitry				P/N 12034147)
			Part Number			Part Number
Range	Differential
200-350	30-100	N.O.	79718			79724
		N.C.	79719
±30
351-500	40-125	N.O.	79720			79725
		N.C.	79721
±45
501-750	50-150	N.O.	79722			79726
±60		N.C.	79723

*Note: The N.C. circuit is the reference circuit for the dual circuit switch; the normally open circuit is not adjusted. For applications requiring the normally open circuit as the reference circuit, the N.C. circuit is not adjusted.

Specify: 1. Set point 2. Actuate on increasing or decreasing pressure 3. SPST N.O. or N.C. SPDT.

Burst Pressure:	3000 PSI
Ratings:
Resistive:	15	AMP-	6	VDC
	8	AMP-	12	VDC
	4	AMP-	24	VDC
Inductive:	1	AMP-	120	VAC

0.5AMP- 240 VAC

Standard Seal: Nitrile

(others available)

Temperature

Range: -40° F to + 250° F

Connector: 1/2-20 UNF (o-ring fitting)

Terminals:	#8-32 screws,
	1/4” blade,
	280 Series Metri-Pack
Circuitry:	SPST-N.O., N.C., D.C.
Base:	Steel
Cover:	Glass reinforced
	polyester
Options:	Brass, stainless steel
	base; o-ring fittings;
	seal for brake fluid;
	wire leads (potted and
	sealed); boot p/n
	79380 (see photo on
	page 4.)

7