Honeywell Switches Set Points from 1.1 to 22 Hg, Pressure Hg vacuum max Burst Pressure 150 PSI

Set Points from 1.1” to 22” Hg

5000 Series Extended Duty Vacuum Switches With Direct Action Blade Contacts

The 5000 Series switch is specifically designed to stand up to extended duty applications. This switch is factory set. It features a fluorosilicone rubber diaphragm for compatibility with a wide variety of fluids, and various terminations including a Metri-Pack connector that forms a tight seal when connected. Among the outstanding design benefits are its durable construction, compact size, and enhanced set point integrity.

Standard Specifications
Type:	Direct action blade
	contact
Contacts:	Silver alloy, gold plated
Set Point:	Factory set
Vacuum:	1.1 to 22” Hg
Operating

2.3” REF.

1.47” REF.

Switch Boot P/N 79380 for Vacuum and Pressure

Pressure:	30” Hg vacuum max.
Burst Pressure: 150 PSI
Ratings:
Resistive:	15	AMP-	6	VDC
	8	AMP-	12	VDC
	4	AMP-	24	VDC
Inductive:	1	AMP-	120	VAC

0.5AMP- 240 VAC Diaphragm: Fluorosilicone elastomer Temperature

Range: -40° F to + 250° F

Connector: 1/8-27 NPT male thread

Terminals: #8-32 screws, 1/4” blade,

280 Series Metri-Pack

Circuitry: SPST-N.O., N.C.

Base: Brass

Cover: Glass reinforced polyester

Options: Various base connector thread sizes; wire leads (potted & sealed).

5000 Series Switch

with Screw Terminals

	5000 Series Vacuum Switch					Two Terminals
			Internally Grounded
				Part Number		Part Number
	Contact Setting
		Circuitry	Screw		Blade	Screw	Blade
	1.1-22” Hg	N.O.	78813		78814	77342	77344
		N.C.	78815		78816	77343	77345
Standard set points are 2”Hg(27” H2O), 4”Hg, 9”Hg, and 17”Hg
	Contact Setting	Tolerance
	1.1-3”Hg (15-41”H2O)	±.22”Hg(3”H2O)
	4-8”Hg	±1”Hg
	9-17”Hg	±2”Hg
	18-22”Hg	±3”Hg

6