SINGLE ALARM SETTING

Press ALARM ON/OFF to select the single alarm. If the alarm is disarmed, the alarm time will be displayed as “OFF”. If you choose not to set the SINGLE ALARM press ALARM ON/OFF again to advance to the PRE-ALARMsetting procedure.

1.Press to view the previous single alarm time and arm the alarm.

2. Press to disarm the single alarm and have the display read “OFF”.

3.When the single alarm time is visible, press and hold ALARM ON/OFF for 3 seconds;

4.

The alarm hour digit will flash, then press

 

or

 

to

5.

adjust the desired hour.

 

 

Press ALARM ON/OFF again, the alarm minute digit

will flash, then press or to adjust the desired minute.

6.Press ALARM ON/OFF again and the single alarm is set with the icon “S ” on the display.

PRE-ALARM SETTING

Press ALARM ON/OFF to select the pre-alarm. If alarm is disarmed, the alarm time will be displayed as “OFF”. The pre-alarm can be set only if the weekday alarm or the single alarm is set. If you choose not to set the PRE-ALARMpress ALARM ON/OFF again to exit the setting procedure.

1.Press to view the previous pre-alarm time and arm the alarm.

2. Press

 

to disarm the pre-alarm time and have the

 

 

display read “OFF”.

3.When the pre-alarm time is displayed, press and hold ALARM ON/OFF for 3 seconds;

4. The minute digit will flash, then press or to adjust the desired pre-alarm period in the sequence of 15, 30, 45, 60, 75, 90 minutes.

5.Press ALARM ON/OFF again and the pre-alarm is set with the icon “PRE-AL” on the display.

12

USING THE ALARM AND SNOOZE

When the alarm sounds, press the LIGHT/SNOOZE key to temporarily stop the alarm. After depressing LIGHT/ SNOOZE, the alarm sound will resume in 5 minutes. If the alarm is not disabled after that, it will sound for 4 more minutes and then will stop by itself.

Press ALARM ON/OFF to disable any alarm.

DISABLING ATOMIC TIME

SIGNAL RECEPTION

The main unit can be set manually to disable the daily reception of the WWVB time signal.

Press and hold the and buttons at the same time for 3 seconds and the radio reception icon will disappear. To enable the main unit’s ability to receive the WWVB time signal, press and hold the and buttons at the same time for 3 seconds again. The radio reception icon will turn on and flash. The main unit will start to search for the WWVB time signal immediately.

LOST COMMUNICATION

If the main unit display for the remote sensor goes blank, press and hold for 3 seconds to begin a new signal search. If the signal still isn't received, please make sure that:

1.The remote sensor is in its proper location.

2.The distance between the main and remote units is not over 100 feet.

3.The path between units is clear of obstacles. Shorten the distance between units if necessary.

4.Fresh batteries are installed correctly in both remote sensor and main unit.

13

If this does not work, please perform the following steps:

1.Bring the main unit and remote sensor close together.

2.Remove 4 a small screws from the back of the remote sensor and open the battery compartment.

3.Remove the batteries from the battery compartment and reinstall them in the same manner. Remote sensor LED indicator will flash showing transmission of the signal.

4.Remove the batteries from the main unit and reinstall them in the same manner.

5.On the main unit select the same channel number that set on the remote sensor. Outdoor temperature on the display will show that transmission is being received successfully.

Note: When the temperature falls below the freezing point the batteries in the remote sensor(s) will freeze lowering their voltage output and effective range. During prolonged periods of extreme cold it is advisable to bring the remote sensor indoors, if alkaline batteries are being used. We recommend to use lithium ion batteries at temperatures below 32˚F.

TRANSMISSION COLLISION

Signals from other household devices, such as door bells, home security systems and entry controls, may interfere with this product and cause temporary reception failure. This is normal and does not affect the general performance of the product. The transmission and reception of the temperature readings will resume once the interference ends.

CHECKING REMOTE AND

INDOOR TEMPERATURE

The indoor temperature is shown on the third line of the main unit display. The remote temperature is shown below the top line of the display. The wave icon near the remote temperature reading indicates that there is a good signal reception from the remote sensor.

If there is no signals received from the remote sensor for more than 2 minutes, a dashes “ ” will be displayed. Press and hold button for 2 seconds to activate an immediate signal search.

TEMPERATURE TREND INDICATORS

The trend indicators shows the trend of indoor or outdoor temperatures collected at a particular remote sight. There are three trends will be shown: Rising, Steady, and Falling.

Arrow

Indicator

Temperature

Rising

Steady

Falling

MAXIMUM AND MINIMUM TEMPERATURE The maximum and minimum records of the indoor and remote temperature will be automatically stored in the memory.

The main unit will display the minimum, maximum and the current reading upon each press of the MEM button. If the MEM button is not pressed, the unit will return to the current temperature display in 15 seconds.

To clear the memory, press and hold MEM for 3 seconds. The maximum and minimum readings will be erased.

14

15

Page 4
Image 4
Honeywell TE328ELW Single Alarm Setting, PRE-ALARM Setting, Using the Alarm and Snooze, Lost Communication

TE328ELW specifications

The Honeywell TE328ELW is a sophisticated programmable thermostat designed for those seeking precise climate control in their homes or offices. With a sleek design and user-friendly interface, this device is a blend of functionality and modern aesthetics, making it an ideal addition to any smart home system.

One of the main features of the TE328ELW is its extensive scheduling capability. Users can program up to 7 days in advance, allowing for personalized temperature settings that align with their lifestyle. This means you can have the thermostat adjust to energy-saving temperatures when you're away and warm up just in time for your arrival home, ultimately enhancing comfort while also saving on energy costs.

The Honeywell TE328ELW incorporates advanced technology for improved energy efficiency. It features a large, easy-to-read LCD display that shows the current temperature, set temperature, and other essential information at a glance. The interface is intuitive, allowing users to navigate through settings and options with ease. Additionally, the thermostat offers a battery backup feature, ensuring that your settings are preserved even in the event of a power outage.

Another notable characteristic is the compatibility of the TE328ELW with a variety of heating and cooling systems. It supports different types of systems, including conventional and heat pump systems, making it a versatile choice for various home environments. This flexibility ensures that homeowners can easily integrate the thermostat into their existing setups without the need for extensive modifications.

The Honeywell TE328ELW also comes equipped with features designed to enhance user convenience. The vacation mode allows users to adjust temperatures for times when they are away for extended periods, ensuring that the home remains energy-efficient while protecting against issues like frozen pipes in winter.

Moreover, the thermostat is eco-friendly, supporting initiatives to reduce energy consumption and lower carbon footprints. By optimizing heating and cooling schedules, users can significantly decrease energy use, benefiting both the environment and their utility bills.

In summary, the Honeywell TE328ELW combines smart technology with user-centric design, providing programmable features and compatibility with various systems. With its focus on energy efficiency and convenience, it stands as a reliable choice for those looking to enhance their home climate control experience. Whether for residential or light commercial applications, the TE328ELW is a commendable investment for modern living.