Français : voir la page 17 • Español: vea la página 33

4Link wireless accessories to thermostat (optional)

MENU Press MENU.

Installer Options

Wireless Device

Manager

Add Device

View Connected Devices

Press ▼ to scroll down, then press INSTALLER OPTIONS. Enter security code when prompted.

Security code is the thermostat date code (printed on back of wallplate). Or press

MENU > EQUIPMENT STATUS to find code.

Press ▼ to scroll down, then press WIRELESS

DEVICE MANAGER.

Press ADD DEVICE to start timer, then press buttons on wireless accessories to link them to the thermostat (see next page).

Timer will re-set to 15 minutes after each accessory is linked. Thermostat will exit link mode after 15 minutes if there is no activity.

Press VIEW CONNECTED DEVICES to verify that all wireless accessories have been linked to

the thermostat

Press DONE when finished.

Note: If you are installing more than one thermostat, repeat steps above and on page 10 for each thermostat.

If you are installing multiple thermostats, you must press DONE to exit “Add Device” mode at each thermostat before linking wireless accessories to the next thermostat.

9