Honeywell VISTA-50PUL manual To Add a User, Security Codes & Authority Levels cont’d

Security Codes & Authority Levels (cont’d)

To Add a User

IMPORTANT: Temporary users should not be shown how to use any system function they do not need to know (e.g. bypassing protection zones).

CODE

1.Enter Master or Manager code and press the

2.Enter the new user’s 3-digit User Number (02-75).

8

key.

3.Enter 4-digit security code for that user. The following prompts will appear.

ADD NEW USER? 0 = NO , 1 = YES

USER NUMBER = 03

ENTER AUTH. LEVEL

Enter 1 to add a new user code. Entering 0 will change the existing user’s code to the code entered in step 3. See Changing A User’s Code section.

Enter the authority level, 1-6, for this user within this partition.

1=master	2=manager	3=operator A
4=operator B	5=operator C	6=duress code

ACCESS GROUP? ENTER 0-8

RF BUTTON ?

0 = NO , 1 = YES

If access schedules have been programmed, this prompt appears. Enter the user’s access group number (1-8) if this user should have limited access to the system. Enter 0 if no access group should be assigned.

This prompt will appear if a 5800 series button transmitter has been supplied and has not yet been assigned to a user. Press 1 if a button transmitter will be assigned to this user. Otherwise press 0.

ENTER BUTTON ZN # (01-86)

If assigning a button transmitter, this prompt will appear. Enter the button’s zone number (see your installer for zone number).

–17 –