Honeywell VISTA-50PUL manual To Change a User’s Code, To Delete a User

Security Codes & Authority Levels (cont’d)

To Change a User’s Code

CODE

1.Enter Master or Manager code and press the to be changed.

2.Enter the new code for that user.

8

key + user number

ADD NEW USER? 0 = NO , 1 = YES

USER 02 CHANGED

SUCCESSFULLY

To Delete a User

The system will recognize that the user number is already in use and will prompt whether or not this is a new user. Enter 0 to change the existing user’s code to the code entered in step 3.

The system will confirm that the change is allowed based on authorization level, and if so, will put the new code into effect.

Note that if changing one’s own code, the system will prompt for the new code to be re- entered. This prevents accidentally changing one’s own code.

CODE

1.Enter Master or Manager code and press the to be deleted.

2.Enter Master or Manager code first entered.

8

key + user number

OK TO DELETE 0 = NO , 1 = YES

USER CODE DELETED

The system will recognize that the User number is already in use and will prompt to confirm that it should be deleted. Press 0 (NO) or 1 (YES).

If yes, that user’s code will be removed from all partitions to which it was assigned, and all authorization levels and other information about that user will be deleted. Note that a user can only be deleted from the partition in which it was first assigned, and can only be deleted by a user with a higher authority level. A User’s security code cannot be deleted by oneself.

–19 –