How to Assemble the Cable with the Accessory Connector

Strip back the cable jacket approx. 3 mm {0.1"} and separate the individual conductors.

.

 

Approx.

 

3 mm {0.1"}

Wire

3 mm {0.1"}

Up A

Contact

Insert

InsertthethewirewireuntiluntilA Apositionposition

and clamp the contacts. and clamp the contacts.

Prepare the individual conductors for clamping. Use MOLEX band tool part number 57027-5000 (for UL- Style Cable UL1015) or 57026-5000 (for UL-Style UL1007) for clamping the contacts.

After clamping the contacts, push them into the proper holes in the accessory connector of this camera until they snap in place.

UpWire

Contact

Cautions:

Shrinking the cable-entry seal is a one-time procedure. Do not shrink the cable-entry seal until ascertaining that the unit is functioning.

CONNECT THIS TO 24 V AC CLASS 2 POWER SUPPLY ONLY.

-20-

Page 20
Image 20
Panasonic WV-CW964 operating instructions How to Assemble the Cable with the Accessory Connector