(3)This returns to the PIX OFF menu.
An asterisk (*) to the right of a PIX OFF number indicates that the number has a blemish compensation pattern assigned to it.
|
| * | ** PIX OFF ** |
| |
| 1 | 2* | 3* | 4* | |
5* | 6* | 7* | 8 | ||
9 |
| 10 | 11 | 12 | |
13 |
| 14 | 15 | 16 | |
000000 RET TOP
To delete a blemish compensation pattern
(1)On the PIX OFF menu screen, select of the pattern you want to delete, and press the CAM (SET) button.
This will display the blemish compensation pattern setting screen.
(2)Press the F3 button.
(3)This returns to the PIX OFF menu.
This will delete the blemish compensation pattern and remove the asterisk (*) to the right of the applicable pattern number.
(4)Adjusting the Preset Positions (REFRESH)
1.To correct for camera deviation from the preset
positions during operation, move the cursor to →PUSH SET to the right of REFRESH, and then
press the F3 button.
The refresh function corrects the camera position when it starts to deviate from the preset positions.
(5)Returning Camera Settings to Their Defaults
(CAMERA RESET)
1.To reset the camera to its initial default settings, move the cursor to →PUSH SET to the right of
CAMERA RESET, and then press the F4 button. This resets the camera to it initial factory default settings. Note, however, that this does not change the camera's preset position, AUTO PAN, patrol, RS485, blemish compensation pattern and password settings.
Note: If above operations are performed while the cursor is located at any other item besides CAMERA RESET, further menu operations may become impossible. If this happens, use the procedure under "Displaying the Setup Menu" on page 22 to
