■Downloading (saving) or uploading (recovering)
camera setting information
Camera setting information that can be downloaded to the system controller etc, includes existing preset position settings and menu settings. However, the following items are not included.
•Patrol function (page 35)
•Area title function (page 37)
•Blemish compensation pattern (page 42)
•RS485 settings (page 21)
•Password settings (page 45)
Be sure the camera is not moving and aimed at something that moves very little (like a wall) before downloading camera preset data to the system controller etc. or uploading downloaded data to the camera.
Uploading of
■Self-diagnosing Function
If abnormal operation due to external noise or some other reason continues for more than 30 seconds, the camera will automatically reset itself and restore normal operation. Reset operation the same initialization routine that is performed when the camera is turned on. If the reset is required too often, it could mean that the camera is installed in a location where there is a large amount of external noise. This can cause malfunction of the camera, so you should contact a qualified service person or system installer as soon as possible.
■Combining devices
There is a limit to the number of devices that can be put together in one configuration. Check the specifications and outer dimensions before hooking up the devices. For more information, see the “Panasonic CCTV System Catalogue” or consult your retailer.
