Twist the red and red/white wires together and twist the black and black/white wires together before connecting to vehicle power.

Connect the green wire to vehicle ground:

!For battery powered vehicles:

The green wire must be connected to the vehicle chassis ground.

For internal combustion engine powered vehicles: The green wire is connected to the vehicle chassis ground, which can also be battery negative.

Wire Color

Connection

 

 

Red

DC + (10-60 VDC)

 

 

Red/White

DC + (10-60 VDC)

 

 

Black

DC -

 

 

Black/White

DC -

 

 

Green

Ground

 

 

Blue

Ignition Input (optional)

 

Refer to the Thor VM2 User’s Guide,

 

available at www.honeywellaidc.com, for

 

further information about ignition control.

 

 

Power Cable Installation

1.The Thor VM2 must not be mounted in the Quick Mount Smart Dock. The power switch on the dock must be turned Off. The power cable must be UNPLUGGED from the dock.

2.While observing the Fuse Requirements in panel 2, con- nect the power cable as close as possible to the actual bat- tery terminals of the vehicle (if using unswitched power).