Honeywell VM2 Setting up the Thor VM2 Software

10.If using the Screen Blanking feature, install the screen blanking box or switch.

11.Press the power switch on the back of the Thor VM2 dock.

12.Press the power button on the front of the Thor VM2.

Note: Have the following information available before setting up your Thor VM2:

•Network ID (SSID) of the Access Point

•WEP key or LEAP authentication credentials

Setting up the Thor VM2 Software

1.Connect the Thor VM2 to an external power source.

2.Press the Power button.

3.You may want to attach a USB keyboard during the setup process.

4.Accept the EULA.

5.Calibrate the touch screen.

6.Set the date and time.

7.Edit the radio parameters.

8.Edit the RFTerm Terminal Emulation parameters (optional).

9.Perform a reboot.