To prevent any potential damage to the hob please carry out the installation following this sequence:
GB IE
1/2 GAS CONICAL
A)As illustrated, as- semble parts in se- quence:
A)fixed pipe
B)washer
C)Elbow fitting with tapered thred connection
2)Tighten the joints with the Spanners, remembering to twist the pipes into position.
3)Attach fitting C to mains gas supply us- ing rigid copper pipe or flexible steel pipe.
Please note
Some models are equipped with both conical and cylindrical connectors for gas supply. Please select the type which is correct for the supply concerned.
| Fig. 5 | |
A | B | |
Cylindrical | Tapered thread conical | |
(but connector) | ||
|
ADAPTING THE HOB TO DIFFERENT TYPES OF GAS
To adapt the Hob for use with different types of gas, carry out the following instructions:
—remove the grids and burners
—insert the hexagonal spanner (supplied) into the burner support (Fig. 6)
—unscrew the injector and replace it with one suitable for the gas to be used (see Table of gas consumption)
—carry out regulation of the burner.
Hexagonal spanner
Fig. 6
GB IE | 7 |
