Option 2

Into a standpipe

Ensure that the standpipe is not located near an electrical
socket.
Install the hose into the standpipe ensuring that the pipe is at
least 400mm from the floor.
Insert the outlet pipe approximately 100mm into the
standpipe. Ensure that the pipe is not kinked or restricted, as
this will prevent the operation of the dryer.
Moving the machine intoposition
Your machine is heavy so care must be taken when moving it.
We recommend that two people move the machine to avoid
strain and possible injury.
●Take care not to damage flooring when moving the
machine.
●When moving the machine to its final position take care
not to kink or damage the hose at the back of the
machine.
Adjusting the feet
Once the machine is in place the feet should be adjusted to
ensure that the machine is level. If the machine is not level it
may become noisy or move.
Adjust the feet on the front corners of the machine until the
machine is firm and level.
10

Do not drag or lift the

machine by its door.

40003324.qxd 28/06/2006 12:59 Page 10