Control panel and indicator lights
Programme Selector – Select the required programme
On/Off button and indicator – Press to switch on, the indicator will light. The display will show the
selected programme (see Programme Guide )
Acrylics/Synthetics button – Press to reduce the heat level for delicate items, the indicator above the
button will light up. To change the heat setting the programme must be reset
Low Heat - Indicator light ON
High Heat - Indicator light OFF
Start/Reset button – Press Start/Reset to commence the selected drying programme. Press for 5 seconds
to cancel/reset the programme
Delay Start button – Allows the user to delay the start of the drying cycle (see details of Operation on
page 16)
Buzzer button – The buzzer is active in normal operation. To cancel the buzzer press the button and the
indicator will light up
Water Guard indicator – Lights when there is excess water in the machine - see the Troubleshooting
section of this manual on page 18.
Filter Care indicator – Lights when the filter needs cleaning
Time to End indicator – Lights when the program starts
Start Delay indicator – Light flashes when the program starts
Digital Display – The two digit display indicates the selected programme, the Start Delay and the Time to
End of the programme
13
Controls and indicators ACRYLICS/
SYNTHETICS
BUTTON
ON/OFF
BUTTON
BUZZER
BUTTON
FILTER CARE
INDICATOR
WATER GUARD
INDICATOR
PROGRAMME
SELECTOR
START/RESET
BUTTON
DELAY START
BUTTON
TIME TO END
INDICATOR
DIGITAL
DISPLAY
START DELAY
INDICATOR
40003324.qxd 28/06/2006 13:00 Page 13