Questions or Concerns?
The Hoover Company wants to quickly resolve any concerns about your cleaner or questions regarding its use. Look on the list provided with the product for your local
Hoover Factory Service Center or
in the Yellow Pages under “Vacuum Cleaners - Household” for the near-
est Authorized Hoover Warranty Service Dealer (Depot) or call:
OR
DO NOT RETURN THIS PRODUCT TO THE STORE OR SEND ITT0 NORTH CANTON FOR SERVICE.
Connect hose
With hose toward front of cleaner, El push hose connector into opening in bag lid.
When hose is attached properly, hose cord plug will reach to receptacle on cleaner.
qInsert plug as deeply into the recep- ’ tacle as possible. Latch (A) will
automatically fasten.
To disconnect hose, first remove hose cord plug from receptacle while pulling out on latch. Then, depress buttons (shown in Fig. 3 by arrows) on hose con- nector and pull up.
Note: The flexible hose contains elec- trical wires for connection to the power nozzle and should not be used if damaged. The wires should not be seen through the outer skin.
P
Attach power nozzle and extension wands
To attach hose to extension wand, u turn plastic latch ring on hand grip until outer slot lines up with inner slot.
Push hand grip down onto wand so that button projection fits into slot. Turn latch ring to lock into place.
13 For cleaners with plastic wands, ’ the second wand, tools and power
nozzle are attached in this manner.
Reverse procedure to remove wand, tool or nozzle.
qFor cleaners with metal wands, attach second wand or tool by
pushing the button projection (C) on one into the spring latch (D) of the first wand. Connect nozzle to second wand in the same manner.
To release, press down on center of latch and remove nozzle.
3
