TO CONNECT AND REMOVE HOSE
To connect hose, insert hose into opening of cleaner lining up the arrow on the hose with the dot on the cleaner. Turn the hose clockwise until it lines up with the bar on the cleaner and latch locks into place.
When the hose is attached properly, the hose cord plug will reach to the receptacle on the cleaner.
Insert the plug firmly and as deep into the receptacle as possible.
To disconnect hose, depress latch away from hose connection opening in cleaner. While holding latch, turn the hose counterclockwise until the arrow lines up with dot on the cleaner.
HOW TO CONNECT THE ‘POWERMATIC’ NOZZLE
1.Attach Powcrmatic nozzle to the end of the ex- tension wand. Be sure the nozzle is locked in place. To release, press down on the center of the white plastic spring latch and remove nozzle.
2.Position cord in cord clips on extension wands.
3.To attach the hose and extension wands, rotate the plastic latch ring to accept the button projec- tion on the extension wands.
Push the handle over the wand so that the button
projection fits into the slot. Turn the outer ring on the handle to lock the handle and wand in place.
5
