Hoover Limited, Supreme Assembling cleaner, Assemble handle, Attach cord, UP Cord Protector slide

Assembling cleaner

It is extremely important to read and follow all the instruction steps in order.

The assembled cleaner will look like this drawing.

If you need assistance with any step of the assembly, call

1-800-944-9200for an automated referral of authorized service outlet locations (U.S. only) or 1-216-499-9499to speak with a representative in our Consumer Response Center.

This cleaner is intended for household use.

Side mounted hose trademark of

The Hoover Company

STEP 1: Unpack carton

STEP 2: Assemble handle

Note: The white switch lock above the ON/OFF switch, aids in assembly of your cleaner. Assembly can be continued if the switch lock is missing. However, do not remove the switch lock until assembly is completed.

Align upper handle and lower handle as shown.

1	ON/OFF SWITCH
ROD SECTIONS
	UPPER
LOWER HANDLE	HANDLE

Place upper and lower handle parts on a flat surface, aligning rod sections. With hands on sides of sections, push parts together firmly until they “click” and rod sections lock together. (Fig. 1)

*Be careful not to press against the dark gray rod extending from thelower handle. (Fig. 2) Do not push handle together with hands on ends of sections.

Remove all parts from carton and identify each item shown.

Make sure all parts, especially small items such as D, G, and K, are located before dispos- ing of cardboard packing.

A.Upper handle B.Lower handle C.Cord D.Bracket

E.Bag compartment and tool storage

F. Cleaner body

G.Handle bolt and nut packet (One extra nut included)

H.Paper bags (Some models come with 2 bags, others have additional bags.)

I.Hose and cleaning tools

J.Extension wand K.Extra belt

3

A B

F

I

J

D

E

C

G H

K

STEP 3: Attach cord

2“UP” CORD PROTECTOR (slide ➜)

		LOWER HANDLE		UPPER
*ROD				HANDLE
			Insert large rectangular end of
3	“UP”
			cord into pocket in bottom of
			handle, with side marked “UP”
			visible. (Fig. 2)
			Make sure rectangular end is
			pushed into the handle as far as
			possible. (Fig. 3)

*ROD CORD PROTECTOR Slide cord protector toward upper handle. (Fig. 2)

Continued ➜

4