4 | ARROW | CORD |
|
PROTECTOR
Rotate cord protector on cord until you see its arrow. (Fig. 4)
| 5 | CORD PROTECTOR |
8 |
RAILS |
9 |
RAILS |
STEP 4: Attach handle
Note location of tapered rails on bracket and on lower handle. (Fig. 8)
GROOVE
SLOT
UPPER
HANDLE
LOCK TAB
With printed side of bracket facing up, slide rails on bracket onto rails on lower handle until bracket snaps past the lock tab. (Fig. 9)
6
UPPER
HANDLE
CORD PROTECTOR
With arrow on cord protector pointing toward arrow on upper handle, press groove in cord protector into slot in upper handle. (Fig. 5 and 6)
BRACKET
HOLE
Pull bracket toward bottom of handle slightly to make sure bracket is locked in place.
Make sure hole in bracket aligns with hole in handle.
7
CORD
PROTECTOR
Pull cord tight.
Press cord into place at each of the three notches indicated. (Fig. 7)
Do not plug cleaner in until assembly is totally complete.
5
10
HANDLE BASE 
With ON/OFF switch to front, place assembled handle onto handle base of cleaner body. (Fig. 10)
Rock handle side to side while pushing down firmly. Extra pushing effort may be re- quired.
Continued ➜
6
