Pull switch lock above ON/OFF switch straight out. (Fig. 19)
Dispose of switch lock.
Note: If switch lock has come off during assembly make sure switch is in the OFF position (down) before plug- ging cord into electrical outlet.
19
SWITCH
LOCK
ON/OFF
SWITCH
22
Position wand,with smaller end down,in side of cleaner as shown. (Fig. 22)
STEP 7: Attach hose and tools
With cleaner handle in lowest position, open hose door and insert hose end with tabs into cleaner.
Open hose door and insert hose end with tabs into the cleaner.
Turn hose end to lock in place. (Fig. 20)
Raise handle to upright position.
Bring hose toward front of cleaner and stretch hose over hose rack. Push opposite hose end firmly into rear “cup” in rack. (Fig. 21)
| 20 | HOSE |
|
| DOOR |
TURN HOSE
21
23
A
B 
24
EXTRA 
BELT
EXTRA
PAPER
BAG
C
Open tool cover (some models only).
Position dusting brush (A), furniture nozzle (B), and crevice tool (C), into tool storage area as shown. (Fig. 23)
Note: Some models do not have a tool cover.
The extra belt and one extra paper bag can be stored on the
back of the cleaner handle as shown. (Fig. 24)
CAUTION: When cleaner is turned on, the agitator will continue to rotate when cleaner handle is in upright position. Avoid tipping cleaner or setting it on furni- ture, fringed area rugs, or carpeted stairs during tool use.
Note: Hose ends must be firmly connected to cleaner base and tool rack when cleaning floors.
9
Fill out and return the product registration card included with your cleaner.
10
