4 Lift out rug agitator, remove old belt and place new belt in groove of rug agitator.
5 Replace agita- tor. On one end of
the agitator roll there is a raised
metal platb. Make sure that this end
is placed in
groove on side of cleaner.
6 Place belt on
pulley. Side of belt nearest
cleaner should be in line with arrow on bottom of cleaner.
7 Replace metal
plate. Place metal knobs on front
end of plate in wire holders.
Check to see that
latches are push- ed back and will
not be covered by
plate. Place plate
in position and latch securely.