HOW TO ATTACH OUTER
JACKET TO CLEANER
Place the two projections at the
bottom of the outer bag assembly inside the wire loops at the back of the cleaner. Pull the bag clip to tile left and fit bag against opening. When you release the bag clip, make sure that it fits
completely over the bag lock. Attach the spring to the support hook, which is located on tile handle.
HOW TO ATTACH THROW-
AWAY BAG TO CLEANER
Open the outer jacket and pull
out tube. Roll rubber bag
retainer down the tube toward
the cleaner. Slip the open end of
the
push as [!ar back as possible. (Be
sure to match arrow or1
Unroll the rubber bag retainer so
it holds bag firmly in place.
Grasp the pleats on each side of
the
and pull out until entire dotted
line is visible. Place throw-
away bag inside the outer
jacket without folding and
close jacket.
After turning cleaner on, push down on the handle until the front of the cleaner is free from the carpet. This insures
that the