Hoover Wet/Dry Vacuum cleaner Attach cleaner lid, Attach hose, wands and cleaning tool

1-4

A

B

E

1-5

G F

H H

1-6

I

I

K J

For wet pick-up

Slide foam filter (B) over filter cage

(A).

Make sure that the foam filter is pushed to the top of filter cage near the ribs (E).

Do not use paper filter for wet pick-up.

Attach cleaner lid

(except Supreme 12.5 gallon)

With latches (F) rotated outward, align wand storage clips (G) with “ears” (H) on top of tank.

Rotate latches inward to lock lid in place.

Note: For convenience in attaching and removing the lid, finger holds have been provided.

Attach cleaner lid

(Supreme 12.5 gallon)

Rotate lid latches (I) outward. Align ribs (J) on front of tank with slots (K) on either side of hose inlets; place lid on tank.

Rotate latches inward to lock lid in place.

Note: For convenience in attaching and removing the lid, finger holds are provided.

1-7 1-8

A

B

1-9

A

Attach hose, wands and cleaning tool

Push hose into hose inlet (A) or (B) on cleaner lid; twist hose to tighten or loosen connection.

The wands and tools attach to hose in the same manner.

Press squeegee insert (available on some models) firmly into nozzle opening.

Use squeegee for wet pick-up only.

Additional tools and accessories that are not included with your model are available at additional cost from your Hoover Factory Service Center, Authorized Hoover Warranty Dealer, by using the enclosed order form, or through The Hoover Comapny on- line at www.hoovercompany.com

Attach drain cap

(Available some models)

Screw drain cap onto lower, front of tank as shown.

5